Invented by an experienced licensed builder, Stormseal is a lightweight but strong polymer film that heat-shrinks to cover a damaged structure. Unlike tarps, Stormseal stays put, resisting all weather until permanent repairs are made.

Award-winning Stormseal is made for emergency responders, government agencies, insurance companies and their contractors, and all other roofers or builders. It has been used to protect thousands of storm-damaged properties in Australia, the United Kingdom and around the world.

Stormseal’s features and benefits

Stormseal: The World's #1 Temporary Roofing Protection

Hail Impact Tested

Stormseal: The World's #1 Temporary Roofing Protection

100% waterproof, resists wind, rain and hail for 12 months

Stormseal: The World's #1 Temporary Roofing Protection

UV Resistant – QUV accelerated weather tested

Stormseal: The World's #1 Temporary Roofing Protection

Fire retardant – NFPA 701-2015 tested

Stormseal: The World's #1 Temporary Roofing Protection

Shrink tested contouring to any surface

Stormseal: The World's #1 Temporary Roofing Protection

High strength and tear resistance proven in wind tunnel and hail impact tests

Stormseal: The World's #1 Temporary Roofing Protection

Quality assurance from manufacture through to installation

Stormseal: The World's #1 Temporary Roofing Protection

100% Recyclable

Stormseal: The World's #1 Temporary Roofing Protection

Protected by law

Stormseal: award-winning, innovation

Manufactured in Europe to M1 standards

Training and equipment

  • We have manufacturing and distribution systems in Australia, Europe and the USA, with capacity to scale up production after a severe weather event.
  • We provide nationally accredited training in Stormseal installation, available nationally.
  • Accredited installers access our online customer portal to order Stormseal film and can also purchase a toolkit of all equipment required for correct installation.
  • The low-density film comes on a compact roll for easy storage and transport: one roll (200m2) fits easily in a utility vehicle, along with the necessary tools.
  • The two day training program covers working at height safety and the installation of Stormseal film.
Stormseal Training | Authorised Stormseal Installer in Australia, US & UK
Stormseal Saves Insurers Millions | Stormseal weatherproofs buildings to prevent costly further damage

Installation

  • Installers are trained to complete a damage report on arrival at the worksite.
  • Stormseal film is cut and tailored on-site to fit the damaged structure.
  • Because Stormseal is much lighter than tarpaulins and requires no sandbags or ropes (removed easier and faster)
  • Attachment occurs at the perimeter of the damaged area, so installers spend less time on the roof, reducing risk and cost. 
  • Heat-shrinking increases the strength of the Stormseal film and fits it snugly to the structure, without harming underlying materials.
  • We regularly inspect all Stormseal installations for quality assurance.
  • Stormseal can be easily removed and reapplied for roof inspections when needed.

Awards

Stormseal: award-winning, Australian innovation

Endorsed by the Australian Federal Government via the Accelerating Commercialisation program

FAQs

Stormseal is far more cost-effective than tarps. Tarps are cheaper to procure but they multiply claims costs manifold by causing further property damage when they frequently flap, tear, leak, collapse or flyaway. Labour costs ­are also greater for tarps because they require repeated replacement – 4 to 5 times on average, and up to 13 times – during the months it takes to process a damage claim.

Another cost of tarpaulins is loss of customer goodwill. Customers are traumatised as their home suffers further weather damage and the noise of flapping tarps keeps them awake at night. They experience extreme frustration when they have to telephone their insurer repeatedly to ask for failed tarps to be replaced. In contrast, Stormseal customers are very satisfied because they experience minimal disruption to their lives and have peace of mind knowing their home is secure.

We only sell to accredited contractors, pricing is based upon volumes purchased. Please get in touch with us to learn more.

Installers save time by using Stormseal. Tarp installation time includes the time taken to procure supplies of tarpaulin, sandbags and ropes for each job, as contractors generally don’t carry these on their trucks. Frequently, the first tarp purchased is the wrong size, which means a return trip to the hardware store.

Meanwhile, with a roll of film and complete toolbox already on their truck, the Stormseal installer has cut the film on-site to fit the job, and commenced attachment. One roll of Stormseal holds 200m2, or enough film for 10 average make-safe jobs. This equates to about two days’ work without stopping for further supplies.

When repeat visits to replace failed tarps are added to the account, it’s clear that as Stormseal resists all weather and stays put until permanent repairs can be made, it saves contractors vast amounts of time and cuts insurers’ costs dramatically.

We prioritise the safety of workers, residents and properties and discourage practices that increase risks and escalate costs. We’re proud of Stormseal’s excellent reputation and intend to maintain it. To ensure safety and quality, accountability is key. Our solution is a complete system of accredited installer training, specialist equipment, controlled ordering and performance tracking, so our quality assurance processes cover everything from manufacture to installation.

Only accredited installers can order Stormseal film and a toolkit containing everything needed for correct installation. Instead of relying on ropes, sandbags and ‘Hail Mary’s to hold a tarp in place (and when that fails, returning repeatedly to replace the tarp), Stormseal installers do the job once and do it right.

At Stormseal, poor performance means loss of accreditation for the installer. By contrast, in Australia, when a tarpaulin (almost inevitably) performs poorly and requires replacement, the installer is rewarded with an additional make-safe fee from the insurer. Insurers pass these additional costs on to policy holders as higher premiums. Premiums also rise as claims escalate due to additional property damage caused by flapping, leaking tarps.

Storm victims who suffer under tarps and customers hit with higher premiums are likely to seek a better alternative, i.e. an insurer who uses Stormseal to provide a superior customer experience and keep costs down. Our insistence on safety and cost-effective high quality is positively transforming the insurance repairs industry

Our installers mechanically fix all edges of the Stormseal film securely, often to the eaves of the structure. The risk of secondary damage on removal of the film is low, and if it occurs, the cost of replacing fascia boards or some roof tiles is negligible compared to the massive cost of internal damage to properties caused by flapping, leaking, flyaway tarpaulins.

Property damage is also caused by the sandbags and ropes used with tarps. Ropes are often tied to any available attachment point including gutter brackets, down-pipes, gas/water lines and fences. Under the load of wind or pooling rainwater on the tarp, the ropes’ attachment points are frequently damaged. Sandbags break down within six weeks of weather exposure and the sand escapes, filling gutters and valleys to create barriers that force water back into the roof cavity, causing more internal damage.

Stormseal minimises harm. Tarpaulins, ropes and sandbags frequently cause damage claims to multiply manifold. The superior choice is obvious.

No. We hold inventory and dispatch Stormseal film from our stock when an accredited installer places an order online through our customer portal. We have capacity to scale up film production to meet high demand following a severe weather event.

Yes, Stormseal can cover a full roof if damage is total. However, the product is more often used to cover partial roof damage, e.g. tree impact on one side, or fire damage contained to one area.

Yes, Stormseal can be used to cover partial roof damage, e.g. a damaged whirlybird, a section of broken tiles, or over skylights.

IAG has conducted hail testing on the product, please see the video at: https://youtu.be/rKiFqvavj-Y

Wind tunnel testing has been conducted by CSR and by the HAAG wind tunnel test facility located in Dallas TX. See CSR wind video at: https://youtu.be/0X7w-kF_zXk

Yes, the product can be used for walls, windows, ceilings, garage doors, asbestos removal.

Stormseal film is recyclable; it is not biodegradable. Stormseal film can be repurposed – unlike damaged tarpaulins which generally go to landfill.

Stormseal has two application methods;

Non-intrusive: Stormseal film is fitted to the perimeter of damaged area using external Stormseal brackets, fixed into existing sub-timber like rafters or battens. Typically the roof tile would require replacement.

Intrusive: Stormseal film is attached through roof tiles and or external facia/barge boards at every 1,500mm. In a 10m x 10m area (100m2 or ½ an average house roof) 26 mechanical fixings are required.

Unlike tarps, both Stormseal application methods cause minimal external damage and prevent internal damage by providing lasting, secure weatherproofing.

Yes, Stormseal film is warranted for one year from the time of purchase. The installation guarantee depends on the individual Accredited Installer’s terms and conditions.

Yes, Stormseal film can be produced in many colours. Branding / logos can be printed on the film –minimum volumes apply.

Yes. An access area can be cut out of the film and then resealed. In every installation there’s a checklist sticker applied to the film. The checklist indicates claim number and installer number so you can track it down.

Yes, we work with several insurance carriers.

Yes. Accredited Stormseal installers are trained to complete a roof report before installing the film. If further assessment is required, contractors often cut inspection panels, in which case an accredited installer must remove and replace the Stormseal film. In every installation there’s a checklist sticker applied to the film. The checklist indicates claim number and installer number Similarly, insurers pay for tarps to be removed for roof inspections and replaced.

Stormseal is manufactured in Europe through several suppliers who can scale up quickly to meet demand. Stormseal is also focused on safety and quality with a commitment to ethical, sustainable, local production with zero-waste in manufacturing. There are also back up suppliers available in the Australia and the USA.

Yes, it works on flat roofs for temporary water protection. It’s weldable with a system of joining the film so you can tailor fit it to just about anything.